| - | RHEOTEST® PK 1.1 consists of sensor unit and electronic unit. |
| - | Viscosity range: 1 ... 10 000 mPas |
| - | Necessary quantity of sample material: 25 ml (volume of one stroke: 15 ml) |
| - | One measuring cycle takes maximum 35 seconds |
| - | Relative error: ≤ 2% |
| - | Reproducibility: ≤ 1% |
| - | Temperature range: 0 ... +80 °C |
| - | Handling, evaluation and calibration by single through integrated software, interface RS 232 C or RS 485 with X-ON/X-OFF (standard) or Hardware protocol |
| - | Output signal analog: 4 ... 20 mA (standard) or 0 ... 20 mA |
| - | Relay outputs which may be coordinated to optional limit values of viscosity |
| - | PC control is practicable with optional available Windows compatible software |
| - | Above average working life trough patented high-quality steel measuring system |
| Viskosity (mPas) | Temperature (°C) | Order-no. | |
| Main instrument (sensor and electronic unit) | 1 ... 10 000 | 0 ... +80 | 3051.1.00003 |
| Electronic unit with borings for wall installation Sensor unit with suspended beam Connecting cable between sensor and electronic unit (10 m) | |||
| Capillary 1, ø = 1,0 mm x 1 = 65 mm | 1 ... 20 | 0 ... +80 | 3051.2.12100 |
| Capillary 2, ø = 1,5 mm x 1 = 65 mm | 5 ... 100 | 0 ... +80 | 3051.2.12200 |
| Capillary 3, ø = 2,0 mm x 1 = 50 mm | 20 ... 400 | 0 ... +80 | 3051.2.12300 |
| Capillary 4, ø = 3,0 mm x 1 = 50 mm | 100 ... 2 000 | 0 ... +80 | 3051.2.12400 |
| Capillary 5, ø = 5,0 mm x 1 = 80 mm | 500 ... 10 000 | 0 ... +80 | 3051.2.12500 |
| Capillary 6, special making, e.g. | 1 ... 10 (polymers) 5 ... 50 (coating materials) | 0 ... +80 | 3051.2.12600 |
